E20B
SATA III 6Gb/s | 2.5 Inch
addlink E20B 2.5” SATAIII SSDs use industrial grade controller and is equipped with 112 Layer 3D TLC (BICS5) NAND flash to deliver low power consumption and high-performance SSD, making it the best industrial storage solution for embedded system.addlink E20B is compliant with TCG OPAL for data security. It also supports the latest LDPC ECC, advanced wear leveling, end-to-end data protection, power failure protection, and over-provision technology to ensure data accuracy and integrity for a longer SSD lifetime.
The E20B SSD is available in 240GB to 7680GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, smart retail, military, gaming, and healthcare applications.
Features
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption
-
Power Failure Protection*
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
End to end data protection
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Surveillance/Edge AI
-
Factory Automation
-
Smart Retail
-
Military/ Defense
-
Gaming
-
Healthcare
Interface | SATA III |
Connector | 7 + 15 pin SATA |
DRAM | DDR4/DDR3 |
Flash | 3D TLC |
Capacity | 240GB~7680GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 520 MB/s |
Random Read (up to) | 98k IOPS |
Random Write (up to) | 88k IOPS |
Supply (V) | 5V + -5% |
Max. Endurance | 14,000 TBW (7680GB) |
Max. Power Consumption (R/W) | 2.6/3.7W |
Idle | 1.5W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 1.5M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, End to end data protection, TRIM command, S.M.A.R.T.
|
Dimension | 100mm (L) x 69.85mm (W) x 7mm (H)
|
Form Factor | 2.5" |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data (for support OPAL 2.0 SSD) | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
Power Failure Protection | ○ | Power Loss protection is provided using additional circuitry and capacitors installed to continue to provide power to the SSD in the event of a sudden power loss.
| |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |