E24C
SATA III 6Gb/s | M.2 2242
addlink E24C M.2 2242 SATAIII SSDs use industrial grade controller and is equipped with 112 Layer 3D TLC (BICS5) NAND flash to deliver low power consumption and high-performance SSD, making it the best industrial storage solution for embedded system. addlink E24C is compliant with TCG OPAL for data security and supports the latest LDPC ECC, advanced wear leveling, and over-provision technology. It also optionally supports three low power consumption modes to ensure SSD can extend battery life efficiently.
The E24C SSD is available in 64GB to 1TB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, smart retail, military, gaming and healthcare applications.
Features
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption (Max. Read/Write <1.4W)
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Surveillance/Edge AI
-
Factory Automation
-
Smart Retail
-
Military/Defense
-
Gaming
-
Healthcare
Interface | SATA III |
Connector | M.2 with B+M Key SATA Pin-out |
Flash | 3D TLC |
Capacity | 64GB~1024GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 500 MB/s |
Random Read (up to) | 36.5k IOPS |
Random Write (up to) | 57.5k IOPS |
Supply (V) | 3.3V + -5% |
Max. Endurance | 1,080 TBW (1TB) |
Max. Power Consumption (R/W) | 1.2/1.4W |
Idle | 0.195W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 3M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 42.00mm (L) x 22mm (W) x 1. 35 mm (H)
|
Form Factor | M.2 2242 |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Destroy Erase | ○ | It erases the mapping table, user data, and SSD firmware. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data (for support OPAL 2.0 SSD) | |
DEVSLP Mode | ○ | Customized with the Premium Aluminum heatsink, Crosscutting fat fins, and heat-con- ducing silica gel pad that increase surface and airflow to helps disperse heat by up to 30% for different system. | |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |