E26CP
SATA III 6Gb/s | CFast Card
addlink E26CP Cfast SATA Solid State Disk (SSD) use industrial grade controller and is equipped with Kioxia BICS5 pSLC NAND deliver better endurance (up to 6,400 TBW) and higher performance SSD, making it the best industrial storage solution for embedded system. addlink E26CP is compliant with TCG OPAL for data security and supports the latest LDPC ECC, advanced wear leveling, and over-provision technology. It also optionally supports three low power consumption modes to ensure SSD can extend battery life efficiently.
The E26CP SSD is available in 32GB to 128GB capacities and comes with addlink’s Toolbox software for easy management and real-time monitoring. It is an ideal solution for surveillance, edge AI, factory automation, and gaming applications.
Features
-
High Endurance pSLC Flash Technology (up to 6,400TBW -128GB)
-
AES-256-bit Encryption & TCG-OPAL 2.0 Complaint*
-
Support DEVSLP Mode*
-
Low Power Consumption (Max. Read/Write <1.4W)
-
LDPC with RAID ECC
-
Thermal Protection Mechanism
-
SMART Toolbox for SSD health monitoring
-
Wide-temperature support: -40°C to 85°C
(* It’s optional function and support by specific firmware)
Application
-
Surveillance/Edge AI
-
Factory Automation
-
Gaming
Flash | pSLC |
Capacity | 32GB~128GB |
Sequential Read (up to) | 550 MB/s |
Sequential Write (up to) | 500 MB/s |
Random Read (up to) | 49.5K IOPS |
Random Write (up to) | 78.5k IOPS |
Supply (V) | 3.3V + -5% |
Max. Endurance | 6,400 TBW (128GB) |
Max. Power Consumption (R/W) | 1.25/1.2W |
Idle | 0.175W |
Shock | 1500G0-P/0.5ms duration |
Vibration | 20Hz~80Hz/1.52mm
80Hz~2000Hz/20G |
Operating Humidity | 5%-95% RH, non-condensing |
Operating Temperature (Standard) | 0°C to 70°C |
Operating Temperature (Industrial) | -40°C to 85°C |
MTBF | 3M hrs |
Security (Optional) | TCG OPAL 2.0 Compliant |
ToolBox Utility | Supported |
Technologies | LDPC ECC, Thermal Throttling, SLC Cache, Wear Leveling, Bad block management, TRIM command, S.M.A.R.T.
|
Dimension | 36.4mm (L) x 42.8mm (W) x 3.3mm (H)
|
Interface | SATA III |
Form Factor | CFast |
Solutions
Technologies & Add-On Services | |||
|---|---|---|---|
Write Protect | ○ | When the write protect function enabled, SSD Controller will ignore any write/Erase command from host and only Read is permitted. | |
Secure Erase | ● | It not only deletes the pointer/ mapping stable of the files but also resets all blocks and erases all user data. | |
Crypto Erase | ○ | Erase: table + Data | |
TCG OPAL 2.0 | ○ | Support AES 256bit hardware-based self-encryption and fully compliant with Trusted Computing Group (TCG) Opal Specification. | |
DEVSLP Mode | ○ | Electronic devices with low power consumption features (Partial mode, Slumber Mode, and DEVSLP Mode) generally have longer battery life, no overheating issues and also decrease the energy cost for charging. | |
Advance Thermal Solution | ○ | - External or on-die thermal sensors
- Thermal Throttling to prevent SSD from overheating | |
ToolBox | ● | Self-Monitoring, Analysis and Reporting Technology, is a software that offers an easy way to analyze and manage your SSDs’ Health. |